esphome:
  name: m5cardputer
  friendly_name: M5Cardputer

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:

ota:
  - platform: esphome
    password: "wifipassword"

esp32_ble_tracker:
  scan_parameters:
    active: False

wifi:
  ssid: "DNTD"
  password: "wifipassword"
  fast_connect: True



  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "M5Cardputer Fallback Hotspot"
    password: "wifipassword"

captive_portal:

image:
  - file: "media/m5.png"
    type: RGB
    id: my_image
    transparency: alpha_channel


sensor:
  - platform: homeassistant
    id: temperature
    entity_id: weather.home
    attribute: temperature
    internal: true

text_sensor:
  # Current weather condition from Home Assistant
  - platform: homeassistant
    id: mom_state
    entity_id: person.mom  # The entity_id for weather condition
    internal: true
  - platform: homeassistant
    id: weather_condition
    entity_id: weather.home  # The entity_id for weather condition
    internal: true



binary_sensor:
  - platform: gpio
    pin:
      number: GPIO00
      inverted: true
    name: Button
    id: btn
    on_press:
      then:
        - logger.log: "Button Pressed"
        - delay: 500ms
        - if:
            condition:
              # Check if the button is still pressed after 500ms (for double-tap detection)
              binary_sensor.is_on: btn
            then:
              - logger.log: "Double Tap Detected"
              - homeassistant.service:
                  service: logbook.log
                  data:
                    name: "M5Cardputer"
                    message: "Double Tap Detected"
                    entity_id: binary_sensor.btn
            else:
              - logger.log: "Single Tap Detected"
              - homeassistant.service:
                  service: logbook.log
                  data:
                    name: "M5Cardputer"
                    message: "Single Tap Detected"
                    entity_id: binary_sensor.btn


i2s_audio:
  i2s_lrclk_pin: GPIO43
  i2s_bclk_pin: GPIO41

color:
  - id: color_white
    red: 100%
    green: 100%
    blue: 100%

microphone:
  - platform: i2s_audio
    id: external_mic
    adc_type: external  
    i2s_din_pin: GPIO46
    pdm: true

media_player:
  - platform: i2s_audio
    id: media_out
    name: ESPHome I2S Media Player
    dac_type: external
    i2s_dout_pin: GPIO42
    mode: mono

output:
  - platform: ledc
    pin: GPIO38  # Same pin as backlight
    id: backlight_output
    frequency: 200 Hz
    inverted: false

light:
  - platform: monochromatic
    name: "Backlight"
    output: backlight_output  # Link to the correct output component
    id: backlight
    restore_mode: RESTORE_AND_ON
    gamma_correct: 2.8
    default_transition_length: 1s
    flash_transition_length: 0s
    disabled_by_default: False 

  - platform: neopixelbus
    type: GRB
    variant: sk6812
    restore_mode: RESTORE_AND_ON
    pin: GPIO21
    num_leds: 1
    name: "Cardputer LED"      
    effects:
      - pulse:
      - pulse:
          name: "Fast Pulse"
          transition_length: 0.5s
          update_interval: 0.5s
          min_brightness: 0%
          max_brightness: 100%
      - pulse:
          name: "Slow Pulse"
          transition_length: 500ms
          update_interval: 2s
      - pulse:
          name: "Asymmetrical Pulse"
          transition_length:
            on_length: 1s
            off_length: 500ms
          update_interval: 1.5s
      - random:
          name: Random Effect With Custom Values
          transition_length: 5s
          update_interval: 7s    
      - strobe:
          name: Strobe Effect With Custom Values
          colors:
            - state: true
              brightness: 100%
              red: 100%
              green: 90%
              blue: 0%
              duration: 500ms
            - state: false
              duration: 250ms
            - state: true
              brightness: 100%
              red: 0%
              green: 100%
              blue: 0%
              duration: 500ms
      - flicker:
          name: Flicker Effect With Custom Values
          alpha: 95%
          intensity: 3.3%
spi:
  clk_pin: GPIO36
  mosi_pin: GPIO35
  miso_pin: GPIO39

display:
  platform: ili9xxx
  model: st7789v
  cs_pin: GPIO37
  dc_pin: GPIO34
  reset_pin: GPIO33
  rotation: 90
  invert_colors: true
  lambda: |-
    it.image(47, 50, id(my_image));
    // Set background color to black for better contrast
    Color text_color = id(color_white);  // Set text color to white
    // Display the current time
    it.strftime(49, 70, id(roboto_20), text_color, TextAlign::BASELINE_LEFT, "%l:%M", id(sntp_time).now());
    it.print(49, 76, id(roboto_20), text_color, "Your slut is at:");
    it.print(49, 90, id(roboto_20), text_color, id(mom_state).state.c_str());
    // Display current weather condition
    it.print(49, 104, id(roboto_20), id(weather_condition).state.c_str());
    // Display current temperature under the weather condition
    String temp_str = "Temp: " + String(id(temperature).state) + " °F";  // Create the temperature string
    it.print(49, 120, id(roboto_20), temp_str.c_str());  // Convert the String to a const char* and display it
    

font:
  - file: "gfonts://Roboto"
    id: roboto_20
    size: 16

#keypress

# Define the time component
time:
  - platform: sntp
    id: sntp_time
    timezone: "America/Chicago"  # Change to your timezone