Add cardputer

LED works with effects added

cardputer

@@ -0,0 +1,205 @@
+esphome:
+  name: m5cardputer
+  friendly_name: M5Cardputer
+
+esp32:
+  board: esp32-s3-devkitc-1
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+ota:
+  - platform: esphome
+    password: "wifipassword"
+
+esp32_ble_tracker:
+  scan_parameters:
+    active: true
+
+wifi:
+  ssid: "DNTD"
+  password: "wifipassword"
+  fast_connect: True
+
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "M5Cardputer Fallback Hotspot"
+    password: "wifipassword"
+
+captive_portal:
+
+text_sensor:
+  # Current weather condition from Home Assistant
+  - platform: homeassistant
+    id: mom_state
+    entity_id: person.mom  # The entity_id for weather condition
+    internal: true
+
+binary_sensor:
+  - platform: gpio
+    pin:
+      number: GPIO00
+      inverted: true
+    name: Button
+    id: btn
+    on_press:
+      then:
+        - logger.log: "Button Pressed"
+        - delay: 500ms
+        - if:
+            condition:
+              # Check if the button is still pressed after 500ms (for double-tap detection)
+              binary_sensor.is_on: btn
+            then:
+              - logger.log: "Double Tap Detected"
+              - homeassistant.service:
+                  service: logbook.log
+                  data:
+                    name: "M5Cardputer"
+                    message: "Double Tap Detected"
+                    entity_id: binary_sensor.btn
+            else:
+              - logger.log: "Single Tap Detected"
+              - homeassistant.service:
+                  service: logbook.log
+                  data:
+                    name: "M5Cardputer"
+                    message: "Single Tap Detected"
+                    entity_id: binary_sensor.btn
+
+
+i2s_audio:
+  i2s_lrclk_pin: GPIO43
+  i2s_bclk_pin: GPIO41
+
+color:
+  - id: color_white
+    red: 100%
+    green: 100%
+    blue: 100%
+
+microphone:
+  - platform: i2s_audio
+    id: external_mic
+    adc_type: external  
+    i2s_din_pin: GPIO46
+    pdm: true
+
+media_player:
+  - platform: i2s_audio
+    id: media_out
+    name: ESPHome I2S Media Player
+    dac_type: external
+    i2s_dout_pin: GPIO42
+    mode: mono
+
+output:
+  - platform: ledc
+    pin: GPIO38  # Same pin as backlight
+    id: backlight_output
+    frequency: 50 Hz
+    inverted: false
+
+light:
+  - platform: monochromatic
+    name: "Backlight"
+    output: backlight_output  # Link to the correct output component
+    id: backlight
+    restore_mode: RESTORE_AND_ON
+    gamma_correct: 2.8
+    default_transition_length: 1s
+    flash_transition_length: 0s
+    disabled_by_default: False 
+
+  - platform: neopixelbus
+    type: GRB
+    variant: sk6812
+    restore_mode: RESTORE_AND_ON
+    pin: GPIO21
+    num_leds: 1
+    name: "Cardputer LED"      
+    effects:
+      - pulse:
+      - pulse:
+          name: "Fast Pulse"
+          transition_length: 0.5s
+          update_interval: 0.5s
+          min_brightness: 0%
+          max_brightness: 100%
+      - pulse:
+          name: "Slow Pulse"
+          transition_length: 500ms
+          update_interval: 2s
+      - pulse:
+          name: "Asymmetrical Pulse"
+          transition_length:
+            on_length: 1s
+            off_length: 500ms
+          update_interval: 1.5s
+      - random:
+          name: Random Effect With Custom Values
+          transition_length: 5s
+          update_interval: 7s    
+      - strobe:
+          name: Strobe Effect With Custom Values
+          colors:
+            - state: true
+              brightness: 100%
+              red: 100%
+              green: 90%
+              blue: 0%
+              duration: 500ms
+            - state: false
+              duration: 250ms
+            - state: true
+              brightness: 100%
+              red: 0%
+              green: 100%
+              blue: 0%
+              duration: 500ms
+      - flicker:
+          name: Flicker Effect With Custom Values
+          alpha: 95%
+          intensity: 3.3%
+spi:
+  clk_pin: GPIO36
+  mosi_pin: GPIO35
+  miso_pin: GPIO39
+
+display:
+  platform: ili9xxx
+  model: st7789v
+  cs_pin: GPIO37
+  dc_pin: GPIO34
+  reset_pin: GPIO33
+  rotation: 90
+  invert_colors: true
+  lambda: |-
+    // Set background color to black for better contrast
+    Color text_color = id(color_white);  // Set text color to white
+    // Display the current time
+    it.strftime(49, 70, id(roboto_20), text_color, TextAlign::BASELINE_LEFT, "%l:%M", id(sntp_time).now());
+    // Print "NO U" at the top of the screen
+    it.print(49, 80, id(roboto_20), text_color, "Your slut is at:");
+
+    it.print(49, 110, id(roboto_20), text_color, id(mom_state).state.c_str());
+
+
+font:
+  - file: "gfonts://Roboto"
+    id: roboto_20
+    size: 16
+
+#keypress
+
+# Define the time component
+time:
+  - platform: sntp
+    id: sntp_time
+    timezone: "America/Chicago"  # Change to your timezone