Update watchwip

up down and center press rocker works, display works, parsing json responses from home assistant works

watchwip

@@ -7,8 +7,9 @@ esphome:
 esp8266:
   board: esp01_1m
 
-# Enable logging
+# Enable logging with debug level
 logger:
+  level: DEBUG  # Explicitly set logging level to DEBUG
 
 # Enable Home Assistant API
 api:
@@ -27,7 +28,7 @@ wifi:
 font:
   - file: "gfonts://Bytesized"
     id: font1
-    size: 8
+    size: 16
 
 light:
   - platform: neopixelbus
@@ -43,6 +44,22 @@ i2c:
   scl: GPIO4  # D2
   scan: true
 
+# Text sensors for weather and location information
+text_sensor:
+  # Location name from Home Assistant
+  - platform: homeassistant
+    id: weather_location
+    entity_id: sensor.weather  # The entity_id for your weather location
+    attribute: friendly_name  # Use the friendly name attribute
+    internal: true
+
+  # Current weather condition from Home Assistant
+  - platform: homeassistant
+    id: weather_condition
+    entity_id: weather.home  # The entity_id for weather condition
+    internal: true
+
+# Display configuration to show the weather condition and location
 display:
   - platform: ssd1306_i2c
     model: "SH1106 128x64"
@@ -50,32 +67,53 @@ display:
     update_interval: 1s
     address: 0x3C  # Default I2C address for SH1106
     lambda: |-
-     it.print(0, 0, id(font1), "ESPHome Watch");
+      // Display weather location
+      it.print(0, 0, id(font1), "Location: ");
+      it.print(0, 16, id(font1), id(weather_location).state.c_str());
 
-# Buttons configuration
+      // Display current weather condition
+      it.print(0, 32, id(font1), "Condition: ");
+      it.print(0, 48, id(font1), id(weather_condition).state.c_str());
+
+# Define pull-up buttons for GPIOs (as before)
 binary_sensor:
   - platform: gpio
-    pin: GPIO0  # Possibly DP09, assuming GPIO0 is used
+    pin:
-    name: "Button Up"
+      number: GPIO1
-    on_press:
+      mode: INPUT_PULLUP
-      - light.toggle: ws2812b
+    name: "Button GPIO1"
   - platform: gpio
-    pin: GPIO2  # Possibly DP10, assuming GPIO2 is used
+    pin:
-    name: "Button Down"
+      number: GPIO2
-    on_press:
+      mode: INPUT_PULLUP
-      - light.toggle: ws2812b
+    name: "Button GPIO2"
   - platform: gpio
-    pin: GPIO16  # Button A (changed from GPIO4 to GPIO16)
+    pin:
-    name: "Button A"
+      number: GPIO3
-    on_press:
+      mode: INPUT_PULLUP
-      - light.toggle: ws2812b
+    name: "Button GPIO3"
   - platform: gpio
-    pin: GPIO12  # Side Button 1 (kept as is)
+    pin:
-    name: "Side Button 1"
+      number: GPIO9
-    on_press:
+      mode: INPUT_PULLUP
-      - light.toggle: ws2812b
+    name: "Button GPIO9"
   - platform: gpio
-    pin: GPIO14  # Side Button 2 (kept as is)
+    pin:
-    name: "Side Button 2"
+      number: GPIO10
-    on_press:
+      mode: INPUT_PULLUP
-      - light.toggle: ws2812b
+    name: "Button GPIO10"
+  - platform: gpio
+    pin:
+      number: GPIO12
+      mode: INPUT_PULLUP
+    name: "Button GPIO12"
+  - platform: gpio
+    pin:
+      number: GPIO13
+      mode: INPUT_PULLUP
+    name: "Button GPIO13"
+  - platform: gpio
+    pin:
+      number: GPIO14
+      mode: INPUT_PULLUP
+    name: "Button GPIO14"